Kuvaus
NOTE: Overstretching the tape may cause it to tear. To get a feel for optimal tension, find a ruler and stretch 10 inches of tape to 11.5 inches. This is about as far as you want to stretch the bar tape when wrapping your bars; the max stretch on Supple Lite Bar Tape is 12 inches.
Compatibility
Fits all road bike drop bars.
Installation Instructions For the smoothest feel, aim for a 25mm stagger. Increasing the overlap will provide additional cushion, but will create a surface with ridges (which some folks like for added grip).
You’ll want to have scissors, mallet, and a marker/pen on hand. Here’s how to get started:
1) Grab the end of the tape to get a sense of its strength and stretch.
2) Adjust the lever body (shifter/brake hoods) to final position.
3) Use tape (not provided) to hold the brake and shifting housing to the handlebars.
4) Roll back the rubber hood covers away from the handlebars.
5) Beginning at the bar end, wrap bars inward, moving toward the stem.
6) Once the bar tape has been wrapped to within a desired distance to the stem, apply the polyurethane finishing tape for a clean, final touch.
7) Insert bar end plugs.
8) Ride off-road with comfort.
